PRODUCTSCommunication Devices

From project proposal to development/
sales of both hardware and software


Built-in LTE, IP wireless device for public transportation


IP-PTT (Push-to-Talk communication using Internet Protocol) public transportation
High quality LTE line, High quality response, vast countrywide coverage, GPS localization feature

Main functions

 ・Individual calls
 ・Multi-destination calls

●Voice message service

●Parameter settings through Web server

IP-T10 forebody

LTE Module Built-in LTE and GPS functions, KDDI approved product (SL-U110) inside.
External Speaker connectorUse of External Speaker instead of PTT SpeakerMic Speaker (3.5φ Connector)
PTT SpeakerMic connector IP-T10 dedicated PTT SpeakerMic Connector (RP13A-12PA-13SC)

PTT SpeakerMic


SystemCPU Freescale i.MX.280(454 MHz)
RAM/FLASH 128 MB DDR2 / 1Gbit NAND Flash
OS Linux 2.6.35
Protocol SIP RFC3621,Iforce’s specification
Activation Online settings through Air in parallel to Offline method through Web Server
Speech Codec G.729 A
SW Upgrade Air Upgrade Automtic Firmware Upgrade through the Upgrade server
Communication Data transmission mode 4G LTE (SL-U110)
Max. Transmission speed uplink to to 25Mbps,downlink up to 75Mbps
GPS SL-U110 Built-in GPS, External GPS connector (Option)
PTT Speaker Mic 3 buttons(PTT,Mode,Play),Connector(RP13A-12PA-13SC)
Speaker(8ohm 1W以上),Mic(-42dB)
External interface - RJ45 1 port,USB 1 port、外部GPS Connector、外部Speaker
Power Consumption current Stand by: 160mA(12Vvehicule), 90mA (24V Vehicule)
In motion:190mA(12V Vehicule), 100mA (24V Vehicule)
Peake number: 200mA(12V Vehicule), 110mA(24V Vehicule)
Power Supply Voltage DC 10~ 37V (Built-in overvoltage prevention)
SizeMain body: 141mm x 137.5mm x 34.5mm(exclude cradle)
Body weight: 445g
PTT Speaker Microphonesize: 82mm x 63mm x 28mm (Exclude Clip)
PTT Speaker Microphone wight: 200g
Reliability Thermal behaviour - 20℃ ~ 60℃